PRG’s partners span many aspects of the defense and security landscape. We are driven to deliver what is needed– when it is needed– providing critical support that matters to those in need of it most.
Can’t find what you’re looking for? Contact us as this is merely a sampling of our product offering.
SPECIFICATIONS
| Earphone Type | Dynamic |
| Earphone Impedance | 150 ohms (300 Ohms each; wired in parallel) |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency Response | 100 – 5,500 Hz |
| Boom Type | Hinged wire |
| Headpad/Hardware | Super-soft, foam |
| Ear Seals | Undercut, comfort-gel |
| Microphone | M-101 Amplified Dynamic or non-amplified |
| Mic Impedance | 5 ohms +/- 20% |
| Mic Sensitivity | Non-amplified = .07 – 14mV @ 1khz for 103dB SPL input or Amplified = 400mV +/- 6dB into 150 ohm load @ 1kHz for 114dB SPL input |
| Mic Freq Response | 300 – 3000Hz |
| Comm Cord | 5 ft. coil |
| Plug Type | U-174/U |
| NRR | 27 dB |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/07/H10-66-Data-Sheet.pdf” title=”H10-66 Data Sheet”]
SPECIFICATIONS
| Weight/Headset only | 19oz/538g |
| Comm Cord | 5-foot coil, with U-174/U |
| Certified NRR (3rd Party) | 24 dB |
| Dome Type | Shallow, ABS |
| Earphone Type | Dynamic |
| Earphone Impedance | Low Impedance / 10 ohms. (19ohms each, wired in parallel) |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @1KHz |
| Earphone Frequency | M-101 Amplified Dynamic or non-amplified 100 – 5,500Hz |
| Microphone | M-87/AIC |
| Mic Impedance | 5 ohms +/- 20% |
| Mic Sensitivity | .05 - .11 mV at 1,000Hz with input of 103 dB SPL |
| Mic Frequency Response | 300 – 3,000Hz |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/H10-76-Data-Sheet-PRG.pdf” title=”H10-76 Data Sheet – PRG”]
Featuring Noise-shielded microphone (muff) with
on/off switch, Microphone muff secured to mouth by snap-fastened nylon straps, 30-inch straight cord with U-174/U plug, Soft foam head pad with foam ear seals for maximum comfort, Corrosion-resistant, chrome-plated head pad/stirrup assembly and a Noise Reduction Rating (NRR): 26 dB
SPECIFICATIONS
| Earphone Type | Dynamic |
| Earphone Impedance | 19 Ohms each; wired in parallel |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency Response | 100 – 5,500 Hz |
| Boom Type | Mic Shield Assembly |
| Headpad | Soft comfort foam (ribbed) |
| Hardware | Chrome-plated, corrosion-resistant |
| Ear Seals | Foam filled |
| Microphone | M-101 Dynamic |
| Mic Switch | On/Off |
| Mic Impedance | 5 ohms +/- 20% |
| Mic Sensitivity | Non-amplified = .07 – 14mV @ 1khz for 103dB SPL input or Amplified = 400mV +/- 6dB into 150 ohm load @ 1kHz for 114dB SPL input |
| Mic Freq Response | 300 – 3000Hz |
| Comm Cord | 30 inch straight |
| Plug Type | U-174/U |
| NRR | 26 dB |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/H7010-Data-Sheet-PRG.pdf” title=”H7010 Data Sheet – PRG”]
Single volume control 1200 ohm earphones, wired in parallel for enhanced reliability, 5-foot extended coil cord with
single plug (U-174/U) and Certified Noise Reduction Rating (NRR): 23 dB
SPECIFICATIONS
| Earphone Type | Dynamic |
| Earphone Impedance | 600 ohms (1200 Ohms each; wired in parallel) |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency Response | 200 – 5,500 Hz |
| Boom Type | Universal flex |
| Headpad/Hardware | Super-soft, Double-foam |
| Ear Seals | Undercut, comfort-gel |
| Volume Control | Single, 5K ohms |
| Microphone | M-7A Amplified Electret |
| Mic Impedance | 50 ohms +/- 20% |
| Mic Sensitivity | 400mV RMS +/-dB into 150 ohm load @ 1kHz for 114dB SPL input |
| Mic Freq Response | 300Hz – 3.5KHz per RTCA DO 214 |
| Comm Cord | 5 ft. coil |
| Plug Type | U-174/U |
| Weight (headset only) | 16.5 oz |
| NRR | 23 dB |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/C-17-Data-Sheet-PRG.pdf” title=”C-17 Data Sheet – PRG”]
Single ear permits hearing of ambient sound. Lightweight design and full flex boom with M-87 Dynamic Microphone. Features Soft foam-chambered head pad and temple pad with comfort-gel ear seal for maximum comfort and comes with a coil cord with U-174/U plug, extending to 5 feet.
| SPECIFICATIONS | |
| Earphone Type | Dynamic |
| Earphone Impedance | 19 ohms each; wired in parallel |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency Response | 100 – 5,500 Hz |
| Boom Type | Universal flex |
| Headpad/Hardware | Super-soft, Double-foam Plug Type |
| Volume Control | Single, 1K ohms |
| Microphone | M-87/AIC |
| Mic Impedance | 5 ohms +/- 20% |
| Mic Sensitivity | .05 - .11 mV @ 1000Hz with input of 103 dB SPL |
| Mic Freq Response | 300 – 3000Hz |
| Comm Cord | 5 ft. coil |
| Ear Seal | Undercut, comfort-gel Weight (headset only) |
| NRR | N/A |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/UAV-Data-Sheet-PRG.pdf” title=”UAV Data Sheet – PRG”]
ENC technology for increased noise attenuation, High/Low-impedance select switch on dome matches headset to system impedance (military/civilian). Soft foam-filled head pad with undercut comfort-gel ear seals for maximum comfort and Hybrid flex/wire boom with M-101 Dynamic Microphone (MIL-M-26542/2 USAF specifications)
SPECIFICATIONS
| Earphone Type | Dynamic (ENC) |
| Earphone Impedance | 150 ohms (300 Ohms each; wired in parallel) |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency Response | 100 – 5,500 Hz |
| Boom Type | Hybrid flex/wire |
| Headpad/Hardware | Super-soft, foam |
| Plug Type | U-174/U |
| Microphone | M-101 Amplified Dynamic or non-amplified |
| Mic Impedance | 50 ohms +/- 20% |
| Mic Sensitivity | Non-amplified = .07 – 14Mv @ 1khz for 103dB SPL input or Amplified = 400mV +/- 6dB into 150 ohm load @ 1kHz for 114dB SPL input |
| Mic Freq Response | 300 – 3000Hz |
| Comm Cord | 5 ft. coil |
| Ear Seals | Undercut, comfort-gel |
| Weight | 24 oz |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/H10-66XL-Data-Sheet-PRG.pdf” title=”H10-66XL Data Sheet – PRG”]
ENC technology for increased noise attenuation, fail-Safe operation and expanded, soft foam head pad. Hybrid flex/wire boom with M-87 Dynamic Microphone
(MIL-M-26542/2 USAF specifications) and allows use of standard-issue oxygen/biochemical mask with microphone.
SPECIFICATION
| Weight | 18 oz |
| Comm Cord | 5-foot coil, with U-174/U |
| Dome Type | Lightweight, ABS |
| Earphone Type | Dynamic (ENC) |
| Earphone Impedance | Monaural, 150 Ohms nominal, 300 Ohms nominal per side |
| Earphone Sensitivity | 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
| Earphone Frequency | 100 – 5,500Hz |
| Microphone | M-87/AIC |
| Dynamic Mic Impedance | 50 ohms +/- 20% |
| Mic Sensitivity | .05 - .11 mV at 1,000Hz with input of 103 dB SPL |
| Mic Freq Response | 300 – 3,000Hz |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/06/H10-76XL-Data-Sheet-PRG.pdf” title=”H10-76XL Data Sheet – PRG”]
| SPECIFICATIONS | |
| Ear coupling | On-the-ear |
| Hardware | Lightweight Alloy |
| Connector Type | U-174/U |
| Connection Cable | 0.155” (4-mm) OD shielded cable, length ~ 6 ft. (1.8 m) |
| Weight w/o cable | ~ 8.4 oz. (238 g) |
| Battery life | Up to 50 hours (2 AA batteries) |
| Operating temperature | -20°C to +55°C |
| Operating voltage | 3VDC (2x AA); 11 - 30 VDC (XP model only) |
| Dome type | ABS |
| Characteristic SPL | ~95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal |
| Contact pressure | ~0.6 lb. (2.7 N) |
| ENC peak attenuation | 30dB @ 150Hz |
| ENC attenuationrange | 20Hz―1KHz |
| Total harmonic distortion (THD) | < 1% - 110 dB SPL (300 - 3,000 Hz) |
| Transducer | Dynamic |
| principle | |
| Ear Impedance | 100 Ω mono |
| Ear Freq Response | 12 - 15,000 Hz |
| Microphone principle | Dynamic |
| Mic Impedance | 5Ω nominal |
| Mic Sensitivity | 325uV+/-6dB into 5Ω load @ 1kHz for 114 dB SPL input |
| Mic Freq Response | 150 - 8,000 Hz |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/07/DC-PRO-XM-data-sheet.pdf” title=”DC PRO-XM data sheet”]
| SPECIFICATIONS | |
| Ear coupling | On-the-ear |
| Hardware | Lightweight alloy |
| Connector Type | U-174/U |
| Connection Cable | 0.155” (4-mm) OD shielded cable, length ~ 5 ft. (1.5 m) |
| Weight w/o cable | ~ 8.4 oz. (238 g) |
| Operating temperature | -20°C to +55°C |
| Dome type | ABS |
| Characteristic SPL | ~95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal |
| Contact pressure | ~0.6 lb. (2.7 N) |
| Total harmonic distortion (THD) | < 1% - 110 dB SPL (300 - 3,000 Hz) |
| Transducer | Dynamic |
| principle | |
| Ear Impedance | 100 Ω mono |
| Ear Freq Response | 12 - 15,000 Hz |
| Microphone principle | Dynamic |
| Mic Impedance | 5Ω nominal |
| Mic Sensitivity | 325uV+/-6dB into 5Ω load @ 1kHz for 114 dB SPL input |
| Mic Freq Response | 150 - 8,000 Hz |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/07/DC-PRO-M-data-sheet.pdf” title=”DC PRO-M data sheet”]
Expanded, super-soft head pad and larger, comfort-gel, undercut ear seal for greater comfort. Hybrid flex-wire boom for easy, ‘one-touch’ microphone placement. Single volume control and Noise-Canelling, M-7A microphone. 8-foot extended coil cord with single plug (PJ-051)
Advanced ENC technology for increased noise attenuation. Wired for split (left/right) audio (dichotic listening). Larger, comfort-gel, undercut ear seals and expanded, super-soft head pad for added comfort. Hybrid, flex/wire boom for easy, ‘one touch’ microphone placement, dual volume control and Noise-cancelling, M-87 dynamic microphone. 3-foot straight cord, includes pigtails with U-174/U and U-77/U plugs.
Advanced ENC technology for increased noise attenuation. Larger, comfort-gel, undercut ear seals and super-soft head pad for greater comfort. Hybrid, flex/wire boom for easy, ‘one touch’ microphone placement.
Plush, supra-aural (rest-on-ear) design ear seals for lightweight comfort. For use with DC PRO/DC PRO-X headsets.
Over-the-ear, leatherette ear seals with slow recovery foam cradle the ears in comfort and provide a snug, secure seal.
Soft, Breathable Head Pad with Outlast® Technology (DC Pro/DC Pro-X Series) Low profile, Outlast® fabric head pad with vented design absorbs excess heat to keep you cool and eliminates ‘hot spots’. For use with DC PRO/DC PRO-X headsets.
Soft, Breathable Head Pad with Outlast® Technology (DC One-X Series) Low profile, Outlast® fabric head pad with vented design absorbs excess heat to keep you cool and eliminates ‘hot spots’. For use with DC ONE-X headsets.
Improves communications by reducing wind and ambient cockpit noise while transmitting. Ties over M-1/DC microphone.
Improves communications by reducing wind and ambient cockpit noise while transmitting. Check the Model of your microphone for correct size.
Super-Soft, Double Foam Head Pad is wider and more tapered with 60% more surface area in contact with your head to dissipate headset weight. Unique center hinge actually lets the head pad “breathe” for greater comfort. Will enhance comfort on all David Clark H10-Series headsets.
Adapter
■ Power for ENC provided by aircraft
■ Replaces battery pack
■ Rugged, durable design
■ TP-108 plug
Comfort-Gel ear seals with patented undercut design provide 60% more surface area in contact with your head, are 26% lighter and allow 30% more interior room for your ears for quieter, more comfortable flights. Will enhance comfort on all David Clark H10-Series headsets and hearing protectors. Sold in pairs.
Introducing the PRG Defense Flight Helmet Upgrade Kit System. Every aspect of this kit was designed specifically for pilots and aircrew and the dynamic environment they operate in. The PRG Defense helmet upgrade kit offers the most technologically advanced suspension systems available. This technology was originally developed for the US Special Forces. The suspension system (padding) is a rate and temperature sensitive material that conforms to wearer’s unique head shape. These materials provide unparalleled comfort, fit, and stability. These materials are covered in a heat and moisture wicking anti-microbial fabric. The fabric is designed to draw perspiration away from the head and will actually cool the wearer through this evaporation process. Independent testing has shown the combination of our ear seals and liner to provide significantly improved impact protection to standard liners and ear seals. These products will not generate hot spots commonly associated with this type of life support equipment. Our ear seals will conform around foreign objects such as glasses temples. The system will still seal against the head and around the foreign object without producing any discomfort. These products have been designed to provide pain free flying for pilots and aircrew, so you can focus on the primary tasks at hand.
FEATURES:
■ Improved protection – Independent and DoD testing have shown the core material of these products provide superior blunt impact performance over OEM product.
■ Improved Comfort – The PRG Defense kit provides significantly improved comfort over similar product, even during extended mission operations
■ Improved Stability – Product is incredibly stable, most notably when helmet is equipped with additional ancillary equipment such as night vision goggles
■ Thermal Stability – The internal fabric of our liner provides thermal regulating properties. When operating temperature is high, the liner will remain cooler. When temperature is cool, liner will help hold heat in.
■ Anti-Microbial – Liner and ear seals are enhanced with permanent anti-odor and anti-microbial performance.
■ Modular Design – We have product that will fit any US or Foreign flight helmet. Provide old helmets new life.
Sizing
Ear Seals – PRG Defense ear seals are a “one size fits all”. They will fit with any existing communications gear. Our laminate structure provides optimum comfort, attenuation, and maximum side impact protection. The sonic interior wall allows stray noise to penetrate the interior wall, and then dissipates into the ear seal’s sound deadening material. This layer also provides heat and moisture wicking properties, keeping the wearer cool and dry. Ear Seals are available in ½”, ¾”, & 1 1/8” thickness. Also available as combo ear cups for fixed wing helmets.
PRG Defense PROliner II – If you are upgrading an existing helmet, our expert technical staff can assist you with selecting the proper liner for your helmet. If you are replacing an existing liner, measure from the front center of the liner, to the center of the back edge. That determines your liner length. The layers of plastic bubbles in your current liner determine the thickness. Typically you will want 1/8” thickness for every layer of plastic liner you are replacing. Liners range from 1/4” to 5/8” thickness.
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/08/PRG-Defense-Upgrade-Kit-Rev-2.pdf” title=”PRG Defense Upgrade Kit Rev 2″]
Deception causes subtle changes in the behavior of the human eye due to increased cognitive load. EyeDetect uses a high definition, infrared eye-tracking camera to measure these subtle changes, and then combines the measures in a mathematically optimal manner to detect deception with 86% accuracy. Without effective screening, visa applicants and refugees can pose a threat to national security. Dishonest and/or unethical security, law enforcement and corrections personnel can wreak havoc upon an organization. Parolees not regularly screened can harm communities. EyeDetect can successfully “see truth” and help keep countries, workplaces and communities safe
| EyeDetect is ideal for |
| Screening |
| ▪ job candidates, employees |
| ▪ law enforcement, security personnel |
| ▪ refugees, visa applicants |
| ▪ parolees, probationers |
| Polygraph Examiners |
|
▪ EyeDetect can quickly screen large group▪
|
|
▪ follow-up with polygraph for higher accuracy
|
| ▪ offer additional services |
Why EyeDetect is a Revolutionary Lie Detection Method
Innovative – First deception detection method that effectively monitors subtle changes in the eyes to “see truth.”
Fast Results – Tests take 30 minutes and results are ready within 5 minutes.
High Accuracy – Classifies examinees as truthful or deceptive with at least 86% accuracy.
Nonintrusive – No cables or sensors to attach to the examinees.
Simple to Use – An EyeDetect Test Proctor and Dashboard Administrator can be trained in less than 3 hours.
Incorruptible & Unbiased – The human-based examiner element is eliminated, and the data are encrypted in real time.
Bank-level Secure – Same encryption and physical security that banks use.
Scalable – An EyeDetect test proctor can monitor up to 40 examinees per day.
Flexible & Portable – Adaptable to your organization’s needs. You can use EyeDetect on-site, send examinees to an authorized testing center, or take it to remote offices.
Multilingual – Tests are available in various languages.
Economical – You save by having one person administer a large number of tests per day. Plus, the short test time minimizes opportunity costs.
Complete Analytics & Reporting – Reports are ready within 5 minutes. Group test results may be filtered by date, department, test type, credibility score and more.
How EyeDetect Works
1. Examinee takes 30-minute true/false test.
2. Data captured, encrypted and uploaded to a secure server in the cloud.
3. Proprietary algorithms interpret the data and provide a report with the Converus Credibility Score within 5 minutes.
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/08/20171006-EyeDetect-Flyer-PRG-db.pdf” title=”20171006 EyeDetect Flyer – PRG db”]
The XCAT handheld detection system features one-step detection of narcotics, explosives, and gunshot residue.
The XCAT is verified for use in a Presumptive Drug Field Testing Program, and is Tested and Approved as a presumptive narcotics field test kit by the Commonwealth of Virginia, Department of Forensic Science.
FEATURES:
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/08/R400-data.pdf” title=”R400 data”]
With over 20,000 devices deployed globally, the FLIR identiFINDER R400 is the most widely deployed handheld radionuclide identification device (RID) in the world. It is used to detect, locate, measure, and identify radioactive sources and produces rapid visible, audible, and tactile alerts that expedite response measures. The identiFINDER R400 provides operators the ideal balance of size and weight for a wide variety of monitoring scenarios including all-purpose surveying, emergency response, and environmental monitoring.
FEATURES:
Detect, Locate, Measure, and Identify Radioactive Sources
GAMMA AND NEUTRON DETECTION- NaI detector enables rapid isotope identification (ANSI N42.34 library) for threat determination; GM detector provides dose rate and total dose
COMMON OPERATING INTERFACE- Large display provides visual alarm confirmation and ability to view advanced spectral data; self-explanatory buttons provide easy, one-handed operation
ADVANCED COMMUNICATIONS- Like other identiFINDER products, the R400 contains on-board Bluetooth, web server, and GPS technologies
| SPECIFICATIONS | |
| SYSTEM OVERVIEW | |
| Data Storage | 2GB internal memory; up to 600,000 spectra |
| Training Requirements | < 10 mins for operator; 1 day for advanced user |
| ENVIRONMENTAL | |
| Operating Humidity | 10 to 80%; |
| Operating Temperature | -4 to 122 °F(-20 to 50 °C) |
| Storage Temperature | 14 to 95 °F(-10 to 35 °C) |
| OTHER | |
| Global Positionsing System [GPS] [removable] | 12-channel SiRF III receiver |
| PHYSICAL FEATURES | |
| Dimensions (L x W x H) | ≤3.7 x 10.6 x 3.2 in (9.4 x 26.9 x 8.1 cm) -with battery |
| Weight | ≤3.2 lbs(≤1.5 kg) |
| POWER | |
| Battery Specs | Either rechargeable NiMH or 4x AA pack(supplied); ≥8h operational battery life; recharge ≤4h when using AC; recharge >4h when using USB |
| Cold Start Time | < 2 mins from cold start |
| Input Voltage | 100-240 VAC (wall and car adapters and USB cable supplied) |
| SAMPLING & ANALYSIS | |
| Nuclide Identification | According to ANSI N42.34 |
| Sample Introduction | Absorption of EM gamma or neutron emissions |
| Sampling & Analysis | From a few seconds to minutes |
| Threats | Detects neutron or gamma radiation emitted from natural occurrences in the environment, special nuclear material, industrial, or medical material |
| SYSTEM INTERFACE | |
| Software | On-board webserver software |
| TECHNOLOGY | |
| Dose Range | 0 nSv - 1 Sv (0 nrem - 100 rem) |
| Dose Rate & Accuracy (Cs-137) | 0 nSv/h - 10.00mSv/h (0 nrem/h - 1.0 rem/h); ±30 % |
| Energy Range [Gamma] | 20 keV - 3 MeV |
| Gamma [High Dose Rate] | Geiger-Mller |
| Gamma LaBr3 | 1.2 x 1.2 in (30 x 30 mm) |
| Gamma Spectrum | 1024 channels; 3 MeV |
| Geiger-Muller Dose Rate Range | 100 µSv/h - 10mSv/h (10mrem/h - 1.0 rem/h) |
| Overload Dose Rate Range | 10 mSv/h - 1 Sv/h (1.0 rem/h - 100 rem/h) |
| Scintillator Dose Rate Range | 0 nSv/h - 500 µSv/h (0 nrem/h - 50mrem/h) |
| Service Interval | 5 year factory maintenance |
| Stabilization | LED |
| Typical Resolution | 4.5 % FWHM at 662 keV |
[pdf-embedder url=”https://www.prgusa.net/wp-content/uploads/2018/08/R400-data.pdf” title=”R400 data”]
© Potomac River Group